Home / Products / Emergency Pressure and Vacuum Relief Vent
Product

Emergency Pressure and Vacuum Relief Vent

Listed under Protectoseal · USA

Emergency Pressure and Vacuum Relief Vent
Product Overview

51700
Protectoseal Series 51700 Hinged Emergency Pressure Relief Vent provides emergency pressure relief when installed on the manhole opening of the storage tank. In emergency situations (fire involvement of the tank) the unit is designed to open on its hinge and provide pressure relief beyond the capacity of the normal breather vents. The hinged design allows the use of a lever principal counterweight so that the pressure settings higher than those available on other dead weight loaded vents of similar size may be achieved. The design also allows convenient access through the manhole opening for tank inspection and maintenance.
Features:
● OPTIMIZED PERFORMANCE VENT – PDF
● Certified test report verifying specified settings and leakage performance
● “Air-cushion” pallet design for low leakage performance of no more than 1 SCFH at 90% of the set pressure
● Peripheral pallet assembly guides and center pallet stem guide ensure proper alignment of pressure pallet assembly on the seat and smooth lifting and reseating action
● Serialized unit and associated weights for easy identification and traceability
● Flow at fully open pressure marked on unit [OSHA 1910.106(b)(2)(v)]
Specifications
● Sizes: 16” (DN 400) through 24” (DN 600)
● Flange Connections: Mates with applicable ANSI, API flange or DIN 16 PN connections
● Materials: Aluminum, Steel and Stainless Steel
● Testing & Certifications: Conforms with the latest ATEX Directive
● Standard Setting Range*: Pressure: 0.75 – 6 oz/in2 | 3.23 – 25.86 mbar
● Standard Setting Range*: Vacuum: 0.5 – 0.75 oz/in2 | 2.15 – 3.23 mbar
● *Settings vary by size
Options
● Flange Connections: Other drilling patterns available upon request
● Diaphragm Materials: FEP, Viton®, Buna N, EPDM, and Neoprene; other materials available upon request
● *Settings: Non-standard setting available
● Special Coatings: PROSHIELD™, FEP and Kynar®
● Instrumentation: Mechanical or electronic lift indicator
● Material certifications for flange and seat
● PURE-TECH™ Design – Special cleaning and packaging for the storage of ultrapure liquids
● Viton® is a Registered Trademark of E. I. DuPont de Nemours & Co., Inc.
● Kynar® is a Registered Trademark of Arkema, Inc.
● Downloads
● Product Specification Sheet – PDF
● Installation & Maintenance Instructions – PDF
● Application Worksheet ( PDF | XLS )